Why Pikmin Bloom Not Counting Steps and How to Fix It
A long walk should bring your seedlings closer to sprouting, right? Yet you open the game and see the same step count. Your phone recorded the walk but your seedlings haven’t budged.
If you’re wondering, “Why is Pikmin Bloom not counting steps?” the answer may be simpler than you think. A delayed health app sync, missing motion permission, or restricted background setting can interrupt progress. Before changing everything, check where your steps stopped appearing. That small clue can save you plenty of frustration.
Here’s how to find the cause and get step tracking working again on iPhone or Android today.
Part 1. Why Is Pikmin Bloom Not Counting My Steps?
A missing step count doesn’t always mean your walk went unrecorded. Sometimes, the game simply hasn’t received your latest activity data. Other times, a tracking restriction prevents your seedlings from progressing.
Let’s look at the most likely reasons behind those missing steps:
- Your health app isn’t connected properly: On iPhone, Pikmin Bloom reads step information through Apple Health. On Android, it counts steps either with the phone’s own pedometer or through Health Connect, depending on the option you picked in the game. Missing permissions or a disconnected fitness service can interrupt that connection. As a result, your phone might record your walk without updating the game. Step counts come from motion data, not distance, so riding in a car rarely adds steps while walking in place still does.
- Your steps haven’t synchronized yet: Don’t worry if your count stays unchanged immediately after walking. Pikmin Bloom can take several hours to synchronize with Apple Health or Health Connect. This delay doesn’t necessarily mean your activity is lost. Give the game some time before changing your settings.
- You’ve reached the daily step limit: Pikmin Bloom allows up to 50,000 daily steps toward seedling growth in planter packs. Once you reach that number, additional walking won’t increase their progress that day. However, your total recorded steps aren’t subject to this same growth restriction.
- Your Apple Watch hasn’t synced with Health: Walking with your Apple Watch doesn’t guarantee an immediate update in Pikmin Bloom. The watch must first transfer its recorded steps to Apple Health. If that connection experiences problems, your game may display an outdated count. Check Health to confirm whether your watch’s activity has arrived.
Part 2. Pikmin Bloom Not Counting Steps: 4 Quick Fixes to Try First
A stuck step count doesn’t always need a complicated fix. The following four quick checks can help you find the problem before digging deeper.
1. Force Close and Reopen Pikmin Bloom
Sometimes the game needs a quick reset before it can show your latest activity. Fully close Pikmin Bloom through your phone’s recent apps screen, then remove it from the background. Open the app again after several seconds and let the home screen load completely. This simple refresh can prompt the game to check for new health data. If you’re still seeing the same number, consider restarting your phone, reopening Pikmin Bloom, and allowing the sync a little longer to update.
2. Check Battery and Data Settings
Even a strong health connection can fail when your phone restricts background activity. Low Power Mode, Data Saver, and battery optimization may prevent Pikmin Bloom from checking new information regularly. Visit your battery settings first, then allow the game to run without optimization. After that, open your mobile data options and enable background data for Pikmin Bloom. These changes keep the app connected when you leave Wi-Fi behind. Finally, reopen the game and check whether your step total begins updating.
3. Verify Location Permissions
Location access helps Pikmin Bloom work properly while you move. Open your phone’s app permissions and find Pikmin Bloom. On iPhone, set Location Services to Allow Always. Android permission labels can vary by phone brand. Look for an option such as “Allow all the time” when available. After changing the setting, open the game again and take a short walk with your phone.
4. Check Your Step Tracking Mode on Android
Your step-counting method can affect how Pikmin Bloom receives activity data on Android. Open Settings, then Privacy & Steps, and select Step count. Phone tracking is the option Niantic recommends; Health Connect is the alternative when you use a linked fitness app. If you pick Health Connect, connect both Pikmin Bloom and your fitness app to it and allow background data access, because Health Connect on its own does not measure steps. After confirming the setting, restart the game and walk briefly with your phone.
Part 3. Fix Pikmin Bloom Step Sync on iOS
If your iPhone records steps but Pikmin Bloom doesn’t, check your Apple Health connection. Missing permissions or restricted background activity might interrupt synchronization. Follow these steps to restore tracking.
1. Enable Apple Health Step Access
Open the Health app and go to your profile picture in the top-right corner. Tap Privacy, then Apps, and find Pikmin Bloom. Enable every step-related permission so the game can read your walking data from Apple Health. Also confirm the Health app itself is receiving steps from your iPhone or Apple Watch.
2. Turn on Motion & Fitness
Go to Settings → Privacy & Security → Motion & Fitness. Enable Fitness Tracking and allow access for Pikmin Bloom and Health. These permissions help your iPhone record movement and share the necessary activity data.
3. Allow Background Location Access
Open Settings → Privacy & Security → Location Services → Pikmin Bloom. Select Always and enable Precise Location where available. This helps the game access your location during background activity. However, location access alone won’t fix missing step data.
4. Enable Background App Refresh
Navigate to Settings → General → Background App Refresh. Enable the feature for Pikmin Bloom if your device allows it. Also check whether Low Power Mode is restricting background activity. This additional check may help the game refresh.
5. Refresh Apple Health Synchronization
Open Apple Health and confirm that your latest steps appear there. Then force close Pikmin Bloom and reopen it with an active internet connection. Allow some time for synchronization because step updates can take several hours.
Part 4. Fix Pikmin Bloom Step Sync on Android
Android phones can record your walking activity while Pikmin Bloom shows an outdated count. Missing permissions, battery restrictions, or disconnected fitness services may explain the difference.
Here’s how to check each setting and restore step synchronization:
1. Check Physical Activity Access
Open your phone’s Settings and find Pikmin Bloom under Apps. Select Permissions → Physical Activity and choose Allow. This permission lets the game access step information from your device.
2. Allow Location Access In the Background
Navigate to Settings → Apps → Pikmin Bloom → Permissions → Location. Choose Allow All the Time where available. Also make sure your phone’s location services are enabled. This supports background location tracking during your walks.
3. Remove Battery Restrictions
Find Pikmin Bloom under Settings → Apps and open its Battery settings. Choose Unrestricted or No Restrictions if available. Battery-saving restrictions can interrupt background activity, so temporarily disable Battery Saver while testing your step count.
4. Check Background Data Settings
Open Pikmin Bloom’s app settings and find Mobile Data or Data Usage. Allow background data and check whether Data Saver blocks the game. Then reopen Pikmin Bloom with an active internet connection to check for updates.
5. Refresh Your Step Tracking Connection
Open Pikmin Bloom → Settings → Privacy & Steps → Step Count. Check whether you’re using phone tracking or Health Connect. For Health Connect, confirm that Pikmin Bloom can read Steps, that your fitness app shares them, and that background data access is allowed. Restart Pikmin Bloom after checking these permissions.
Part 5. Keep Your Pikmin Bloom Steps Counting Without Walking Using MocPOGO
Some days you simply cannot get outside: bad weather, a long shift at work, or a neighborhood you have already walked a hundred times. Your seedlings sit in the planter pack without progress, and the map around you never changes.
MocPOGO is a location changer for Pikmin Bloom, and it takes care of the moving part. Set a route through a park or a shopping district, keep the speed close to a real walking pace, and your steps build up while your Pikmin follow the same path, so seedlings keep growing and you still pick up fruit along the way. Teleport Mode gets you to the area; the steps come from walking the route.
168,282 people have downloaded it.
- Change GPS location on iOS device without jailbreak.
- Teleport to any location instantly with one-click.
- Simulate GPS movement with custom speeds.
- Change the location of all location-based games/apps.
- Newly released Native Mode: spoof iOS location without modded apps for all LBS apps safely.
- Work seamlessly with Pikmin Bloom, Pokémon GO and Monster Hunter Now.
- Multi-device control for up to 15 devices.
- Support the latest iOS 27/Android 17.
Key Features of MocPOGO
- Simulate walking along a planned route instead of moving your real device. Select your start and end points, adjust the speed, and let the tool handle the movement.
- Jump to flower-dense areas before you start your in-game walk. Teleport Mode lets you search for a location and change your GPS position with a few clicks.
- Rely on a cooldown timer to space out your teleports. This reduces the risk of sudden jumps and makes your location history look more consistent.
- Use the same location tools across other popular location-based games. The software supports Pokémon GO, Monster Hunter Now, and similar apps that rely on GPS data.
How to Use MocPOGO for Virtual Movement in Pikmin Bloom
General Mode
Step 1 Download MocPOGO from the official site, install it on your Windows or Mac computer, and launch it. Select General Mode.
Step 2 Connect your Android phone with a USB cable, or over Wi-Fi where available, then choose Pikmin Bloom as the game mode and follow the on-screen prompts.
Step 3 Choose Teleport Mode to move to a park or another area, or pick Two-Spot Mode or Multi-Spot Mode and set the walking speed.
Step 4 Click Go, then open Pikmin Bloom and follow the route to collect fruit and seedlings.
Native Mode (iPhone)
Step 1. Download and launch the MocPOGO iOS app and select Native Mode from the bottom of the screen.
Step 2. Enter your target city or coordinates in the search bar, or tap any desired spot on the map. Tap Teleport.
Step 3. Set up the required VPN connection and trust the certificate. (This is a one-time setup for first use only.)
Step 4. Your iPhone GPS will update to the target location immediately. The spoofed location remains active even after you fully close the MocPOGO app. Open Pikmin Bloom once your location updates and explore the area around you.
Conclusion
A frozen step count can slow down seedling growth and make Pikmin Bloom less enjoyable. Still, the solution usually starts with a few simple checks. Confirm that Apple Health or Health Connect has your latest activity, allow Pikmin Bloom to access steps, and remove battery restrictions that pause background syncing.
If Pikmin Bloom is not counting steps after these changes, restart your phone and allow several hours for delayed data to appear. On the days you cannot walk outside, MocPOGO keeps both parts going: your steps still count in Pikmin Bloom, and you can still reach new in-game areas.
Try it now to keep your steps counting and your seedlings growing from home.
